Нашли дешевле? Отблагодарим скидкой! Мы все можем - мы производители!

Konopatka (flax insulation)

Konopatka (flax insulation)
Konopatka (flax insulation)

Konopatka wooden houses

Konopatka – the seal grooves between the crowns and log in notching the corners. Any structure built of logs or timber, in the period of drying for a significant shrinkage. During shrinkage between the rims are formed uneven gaps. To address these gaps, it is necessary to make konopatku.

Konopatnye work must be completed prior to finishing, because after the caulking, the height of the structure will increase by 5-7 cm.

Any structure built of logs or timber, in the period of drying for a significant shrinkage. During shrinkage between the rims are formed uneven gaps. To address these gaps, it is necessary to make konopatku. Caulk wall can be no earlier than 8 – 12 months from the date of installation.

For konopatki log cabins, as the material used tow (long fiber, short fiber, vytryasku, mezhventsovogo insulation tape / seal) or other modern sealing materials of new generation.

Konopatnye work must be completed prior to finishing, because after caulking, height of buildings will increase by 5-7 cm.

 

 

 

 

 

 

Cost konopatnyh work depends on the quality of collected walls, the starting material (BEAM or logs), as well as the shape of the corner joints (CUP or PAW), and finally determined after checking out the master object.

The price includes:

Complete filling all voids quality linen hemp, hemp seal, laying decorative jute cord.

The price does not include: Tow and jute cord.

The quality of our work konopatnyh achieved in that each wreath pre-wedged, providing access to fill all voids konopatnym material.

Special attention we pay caulking corner joints.

 

Konopatka chopped walls

 

Layer of insulation laid in the process of building a log house, does not give full protection against blowing, so the house caulk after the end of construction. Also, a chopped wall such that during use they provide considerable shrinkage, which leads to the appearance of gaps between the beams or beams and, consequently, to reduce its heat insulating properties. To eliminate this phenomenon carried konopatku walls, which is performed for the first time after the construction of a log house, and in 1 – 1.5 years. For temporary protection log from blowing his cover roofing felt, roofing material or other materials, and in this state is maintained until complete shrinkage of the walls.

Fig. 1 Pile slits tow

Under konopatki log understand seal gaps between the logs hemp, hemp, dry moss, etc. (Figure 1). To this end, Russia has always existed cooperative Caulker, whose art was passed on from generation to generation. The quality of the caulker can be determined only in the winter, when the house begins to rapidly purged. Therefore Caulker formed a kind of society, “trust”, which guarantee the outstanding quality of their work.

Ended konopatka form a neat seam polukantika. Current practice shows that due to further shrinkage of wood and non-professional konopatki log cabin sits at 3-5% and therefore it must build on the 15 – 20 cm above the target height.

Begin to prepare for the first konopatki still in the process of building a log house, which the stacking between the crowns of the cushioning material must protrude at least 5 mm. This speaker gasket material from the power driven into the joints using special tools – “caulking” and mallets – “Mushel” getting windproof seams.

In this case, the fibrous materials are periodically added to the complete filling of gaps. It should be noted that konopatka can raise the height of the log up to 15 cm. Perform konopatku simultaneously around the perimeter of the log with the inner and outer sides, filling the gaps in series between the crowns, starting from the bottom of the groove. Konopatka separately one of the walls, it might skew the framework. There are two types of walls seal carcass, “set in” and “stretching”.

Konopatku “in the banner” made ​​of individual strands, adding them as necessary to completely fill the gaps. Thereafter, a sealing material made ​​of the platen and forcefully hammer in the groove. The quality caulking should be taken seriously, since this depends on the heat loss of the walls, and hence the climate in the house.

Konopatka “to set” is that of hemp or hemp recoiling long strands of a diameter of about 2 mm and is wound into a ball blocked. Loop gain of the coil, which is driven into the grooves between the logs. Konopatku start with the lowest crown, gradually moving from the bottom up. Caulk the gap consistently around the perimeter. Strands compacted first on the top and then at the bottom edge of the log, and only then aligned, ensuring complete filling. Quantity pledged strands depends on the width of the gap, but in any case the sealing material fibers should protrude on both sides log not less than 5 mm.

 

 
 
Buy Konopatka (flax insulation) you can call: 095-47-44-176, 094-927-41-26, 044-362-71-26, or by writing to:  lnozavod.ua@gmail.com . We hope that the price and quality of  Konopatka (flax insulation) you completely satisfied. We will be glad to see you among our customers.

This post is also available in: Russian, Ukrainian

Партнеры:

  • Украинская льняная компания
  • межвенцовый утеплитель
  • Зерно
  • Пелли ЛТД